Reference Guide

!
acl-vlan-group group2
member vlan 20
ip access-group acl2 out
Dell#
Dell#show running-config acl-vlan-group group1
!
acl-vlan-group group1
description Acl Vlan Group1
member vlan 1-10,400-410,500
ip access-group acl1 out implicit-permit
Common MAC ACL Commands
The following commands are available within both MAC ACL modes (Standard and Extended) and do not have mode-specific
options. These commands allow you to clear, display, and assign MAC ACL configurations.
The Z9500 supports both Ingress and Egress MAC ACLs.
You can apply a MAC ACL on physical, port-channel and VLAN interfaces. The permit/deny statements in the ACL determine
how traffic on an interface, VLAN members, or port-channel members is handled.
clear counters mac access-group
Clear counters for all or a specific MAC ACL.
Z9500
Syntax
clear counters mac access-group [mac-list-name]
Parameters
mac-list-name (OPTIONAL) Enter the name of a configured MAC access list.
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
204 Access Control Lists (ACL)