Reference Guide

Command
History
Version Description
9.5(0.1) Introduced on the Z9500.
9.4(0.0) Introduced on the S4810, S4820T, S6000, Z9000, and MXL Switch.
Usage
Information
In a square VLT topology with only one link connecting remote peers, a node must stop sending its VLT
peer MAC address ("vlt-peer-mac transmit" enabled) when the VLT peer is down. If you configure this
time out interval, it will keep sending its peer's MAC address until the timer expires.
Example
Dell(conf-vlt-domain-proxy-gw-lldp)# peer-timeout 5
vlt-peer-mac transmit
Configures a peer to sent its VLT peer's MAC address along with its LLDP TLV.
Z9500
Syntax
[no] vlt-peer-mac transmit
Command Modes VLT DOMAIN PROXY GW LLDP
Command
History
Version Description
9.5(0.1) Introduced on the Z9500.
9.4(0.0) Introduced on the S4810, S4820T, S6000, Z9000, and MXL Switch.
Usage
Information
In a square VLT topology with only one link connecting remote peers, if you configure this command, any
node has to send its VLT peer’s MAC address along with its own MAC address to the remote VLT domain.
By default, a node will send only its own MAC address to the remote VLT domain. This parameter is
applicable for an LLDP proxy gateway configuration.
Example
Dell(conf-vlt-domain-proxy-gw-lldp)# vlt-peer-mac transmit
show vlt-proxy-gateway
Display the VLT proxy gateway configuration.
Z9500
Syntax
show vlt-proxy-gateway info {lldp | static}
Parameters
lldp Display details about the LLDP VLT proxy gateway configuration
static Display details about the static VLT proxy gateway configuration
Command Modes EXEC
EXEC Privilege
EXEC Privilege
Command
History
Version Description
9.5(0.1) Introduced on the Z9500.
1416 VLT Proxy Gateway