Reference Guide

Example
Dell(conf)#vlt-domain 1
Dell(conf-vlt-domain#proxy-gateway static
Dell(conf-vlt-domain-proxy-gw-static)#remote-mac-address
00:01:e8:06:95:ac exclude-vlan 3
peer-domain-link port-channel exclude-vlan
Configure the VLT port channel, which is connected to remote VLT domain for Proxy Gateway and configure the VLANs that
needs to be excluded from VLT Proxy Gateway.
Z9500
Syntax
[no] peer-domain-link port-channel interface-identifier exclude-vlan vlan-
range
Parameters
port-channel Configure the proxy-gateway interface port-channel. Port channel range is from 1
to 512.
vlan-range
Enter the VLAN IDs in which proxy gateway is not needed. The VLANs are excluded
from doing proxy gateway. The value can be a single VLAN ID or comma-separated,
VLAN IDs or a range of VLAN IDs or a combination. For example:
Comma-separated: 3, 4, 6
Range: 5-10
Combination: 3, 4, 5-10, 8
Command Modes VLT DOMAIN PROXY GW LLDP
Command
History
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.
Usage
Information
The VLT port channel interface which is connecting to the remote VLT domain must be configured as
peer-domain-link. Configure the VLANs that needs to be excluded from VLT Proxy Gateway.
Example
Dell(conf)#vlt-domain 1
Dell(conf-vlt-domain)#proxy-gateway lldp
Dell(conf-vlt-domain-proxy-gw-lldp)#peer-domain-link port-channel 20
exclude-vlan 3
proxy-gateway peer-timeout
Configure the proxy-gateway VLT peer timeout value.
Z9500
Syntax
[no] peer-timeout value
Parameters
value Enter the timeout value in seconds. The range is from 1 to 65535. The default is
infinity.
Command Modes VLT DOMAIN PROXY GW LLDP
VLT Proxy Gateway 1415