Reference Guide

Dell(conf-if-vl-100-stack)#show config
!
interface Vlan 100
no ip address
vlan-stack compatible
member TenGigabitEthernet 0/42
shutdown
Dell(conf-if-vl-100-stack)#interface vlan 20
Dell(conf-if-vl-20)#tagged tengigabitethernet 0/42
Dell(conf-if-vl-20)#show config
!
interface Vlan 20
no ip address
tagged TenGigabitEthernet 0/42
shutdown
Dell(conf-if-vl-20)#do show vlan
Codes: * - Default VLAN, G - GVRP VLANs
Q: U - Untagged, T - Tagged
x - Dot1x untagged, X - Dot1x tagged
G - GVRP tagged, M - Vlan-stack
NUM Status Description Q Ports
* 1 Inactive
20 Active T Te 0/42
100 Active M Te 0/42
Dell(conf-if-vl-20)#
Example 2
Dell(config)#vlan-stack protocol-type 88A8
Dell(config)#interface tengigabitethernet 2/10
Dell(conf-if-te-2/10)#no shutdown
Dell(conf-if-te-2/10)#switchport
Dell(conf-if-te-2/10)#vlan-stack access
Dell(conf-if-te-2/10)#exit
Dell(config)#interface tenGigabitethernet 1/0
Dell(conf-if-te-1/0)#no shutdown
Dell(conf-if-te-1/0)#portmode hybrid
Dell(conf-if-te-1/0)#switchport
Dell(conf-if-te-1/0)#vlan-stack trunk
Dell(conf-if-te-1/0)#exit
Dell(config)#interface vlan 10
Dell(conf-if-vlan)#vlan-stack compatible
Dell(conf-if-vlan)#member Te 0/0, Te 1/0, Te 2/10
Dell(conf-if-vlan)#exit
Dell(config)#interface vlan 30
Dell(conf-if-vlan)#untagged TenGi 1/0
Dell(conf-if-vlan)#exit
Dell(config)#
Dell(config)#interface vlan 40
Dell(conf-if-vlan)#tagged TenGi 1/0
Dell(conf-if-vlan)#exit
Dell(config)#
tagged port-channel
Specify tagged VLAN ports.
Z9500
Syntax
tagged port-channel port-channel-number
VLAN Stacking 1383