Reference Guide

Version Description
7.6.1.0 Introduced on the S-Series.
Examples
Dell# show logging driverlog cp
0:Task(dlm): [ 6472921]EEPROM LIB ERR: decipherPpId:349 PPID ERROR:
Mismatching VID and MFGID
1:Task(dlm): [ 101]EEPROM LIB ERR: decipherPpId:379 Invalid
svcTag(n/a)
2:Task(dlm): [ 93]EEPROM LIB ERR: decipherPpId:390 strtoull
invalidates svcTag(n/a): errno(0), *enr(/)
3:Task(dlm): [ 40]EEPROM LIB ERR: decipherPpId:416 svcTag invalid
changing it to NA
4:Task(chmgr): [ 1555744]EEPROM LIB ERR: decipherPpId:349 PPID ERROR:
Mismatching VID and MFGID
5:Task(chmgr): [ 50]EEPROM LIB ERR: decipherPpId:379 Invalid
svcTag(n/a)
6:Task(chmgr): [ 42]EEPROM LIB ERR: decipherPpId:390 strtoull
invalidates svcTag(n/a): errno(0), *ptr(/)
7:Task(chmgr): [ 39]EEPROM LIB ERR: decipherPpId:416 svcTag
invalid changing it to NA
Dell# show logging driverlog linecard 0
0:Task(tUsrRoot): [ 29525]SS DRV DEBUG: Wrapper init complete
1:Task(tUsrRoot): [ 301305]SS DRV DEBUG: Core init complete
2:Task(tUsrRoot): [ 913]SS DRV DEBUG: port:0 isfanout:0
3:Task(tUsrRoot): [ 40]SS DRV DEBUG: port:4 isfanout:0
4:Task(tUsrRoot): [ 36]SS DRV DEBUG: port:8 isfanout:0
5:Task(tUsrRoot): [ 36]SS DRV DEBUG: port:12 isfanout:0
6:Task(tUsrRoot): [ 36]SS DRV DEBUG: port:16 isfanout:0
7:Task(tUsrRoot): [ 36]SS DRV DEBUG: port:20 isfanout:0
8:Task(tUsrRoot): [ 36]SS DRV DEBUG: port:24 isfanout:0
9:Task(tUsrRoot): [ 36]SS DRV DEBUG: port:28 isfanout:0
10:Task(tUsrRoot): [ 35]SS DRV DEBUG: port:32 isfanout:0
Usage
Information
This command displays internal software driver information, which may be useful during troubleshooting
switch initialization errors, such as a downed Port-Pipe.
show logging kernellog
Display the kernel log for the specified hardware component.
Z9500
Syntax
show logging kernellog {cp | rp | linecard slot-id}
Parameters
cp Enter the keyword cp to display the kernel log for the Control Processor on the
switch.
rp Enter the keyword cp to display the kernel log for the Route Processor on the
switch.
linecard slot-id Enter the linecard slot-id parameters to specify the line-card ports for
which you want to display the kernel log. The range of line-card slot IDs is from 0
to 2.
defaults none
Command Modes
● EXEC
● EXEC Privilege
1320 Simple Network Management Protocol (SNMP) and Syslog