Reference Guide

This display output is an accumulation of the same information that is displayed when you execute one of
the following show commands:
● show cam
● show clock
● show environment
● show file
● show interfaces
● show inventory
● show ip protocols
● show ip route summary
● show processes cpu
● show processes memory
● show redundancy
● show running-conf
● show version
Example
Dell# show tech-support linecard 1
----------------------------------- show version
-------------------------------
Dell Force10 Real Time Operating System Software
Dell Force10 Operating System Version: 2.0
Dell Force10 Application Software Version: 9-3(0-507)
Copyright (c) 1999-2013 by Dell Inc. All Rights Reserved.
Build Time: Tue Sep 17 15:03:49 PDT 2013
Build Path: /sites/sjc/work/build/buildSpaces/build16/RAINIER-
DEV-9-3-0/SW/SRC
FTOS uptime is 2 hour(s), 26 minute(s)
System image file is "rainier-1-sys"
System Type: Z9500
Control Processor: Intel Centerton with 3203928064 bytes of memory.
16G bytes of boot flash memory.
1 144-port TE/FG (SJ)
2 192-port TE/FG (SJ)
12 Ten GigabitEthernet/IEEE 802.3 interface(s)
----------------------------------- show linecard 1 verbose
-----------------
-- Unit 1 --
Unit Type : Member Unit
Status : online
Next Boot : online
Required Type : Z9500LC48 - 192-port TE/FG (SJ)
Current Type : Z9500LC48 - 192-port TE/FG (SJ)
Master priority : NA
Hardware Rev : 1.0
Num Ports : 192
Up Time : 0 sec
FTOS Version : 9-3(0-507)
Jumbo Capable : yes
POE Capable : no
FIPS Mode : disabled
Boot Selector : 3.1.0.1c
Boot Selector : 3.1.0.1c
Memory Size : 3203928064 bytes
Temperature : 0C
Voltage : ok
Serial Number :
Part Number : Rev
Vendor Id :
Date Code :
132
Control and Monitoring