Reference Guide

198216 198216
309 acl 6483968 1286144 1259692 0
1259692 1259692
302 sysd 15392768 3305472 965786 0
965786 965786
263 sysmon 704512 24576 0 0
0 0
296 flashmntr 839680 36864 0 0
0 0
198 inetd 995328 45056 0 0
0 0
122 sh 802816 2301952 0 0
0 0
74 sh 708608 2297856 0 0
0 0
30 mount_mfs 13467648 2310144 0 0
0 0
25 mount_mfs 56033280 2310144 0 0
0 0
show software ifm
Display interface management (IFM) data.
Syntax
show software ifm {clients [summary] | ifagt number | ifcb interface |
stack-unit unit-ID | trace-flags}
Parameters
clients Enter the keyword clients to display IFM client information.
summary (OPTIONAL) Enter the keyword summary to display brief information about IFM
clients.
ifagt number Enter the keyword ifagt then the number of an interface agent to display
software pipe and IPC statistics.
ifcb interface Enter the keyword ifcb then one of the following interface IDs then the slot/port
information to display interface control block information for that interface:
● For a port channel interface, enter the keywords port-channel then a
number. The range is from 1 to 512.
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/port information.
stack-unit unit-
ID
Enter the keyword stack-unit then the stack member number to display IFM
information for that unit.
NOTE: This option is only available on the S-Series.
trace-flags Enter the keyword trace-flags to display IFM information for internal trace
flags.
Defaults none
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
Control and Monitoring 127