Reference Guide

Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
rmon event
Add an event in the RMON event table.
Z9500
Syntax
rmon event number [log] [trap community] [description string] [owner name]
To disable RMON on an interface, use the no rmon event number [log] [trap community]
[description string] command.
Parameters
number Assign an event number in integer format from 1 to 65535. The number value must
be unique in the RMON event table.
log (OPTIONAL) Enter the keyword log to generate an RMON log entry. The log entry
is triggered and sets the eventType in the RMON MIB to log or log-and-trap. The
default is No log.
trap community (OPTIONAL) Enter the keyword trap then an SNMP community string to
configure the eventType setting in the RMON MIB. This keyword sets either snmp-
trap or log-and-trap. The default is public.
description
string
(OPTIONAL) Enter the keyword description then a string describing the event.
owner name (OPTIONAL) Enter the keyword owner then the name of the owner of this event.
Defaults As noted in the Parameters section.
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
Remote Monitoring (RMON) 1179