Reference Guide

160 30 3 10000 0.00% 0.00% 0.00% 0 vrrp
126 20 2 10000 0.00% 0.00% 0.00% 0 frrp
154 50 5 10000 0.00% 0.00% 0.00% 0 xstp
118 10 1 10000 0.00% 0.00% 0.00% 0 pim
434 10 1 10000 0.00% 0.00% 0.00% 0 igmp
429 100 10 10000 0.00% 0.00% 0.00% 0 ipm1
170 10 1 10000 0.00% 0.00% 0.00% 0 mrtm
294 100 10 10000 0.00% 0.00% 0.00% 0 l2mgr
98 20 2 10000 0.00% 0.00% 0.00% 0 l2pm
389 40 4 10000 0.00% 0.00% 0.00% 0 arpm
367 10 1 10000 0.00% 0.00% 0.00% 0 lacp
349 10 1 10000 0.00% 0.00% 0.00% 0 tnlmgr
329 10 1 10000 0.00% 0.00% 0.00% 0 otm
333 50 5 10000 0.00% 0.00% 0.00% 0 dsm
323 30 3 10000 0.00% 0.00% 0.00% 0 rtm
315 10 1 10000 0.00% 0.00% 0.00% 0 rip
309 20 2 10000 0.00% 0.00% 0.00% 0 acl
302 460 46 10000 0.00% 0.00% 0.00% 0 sysd
263 0 0 0 0.00% 0.00% 0.00% 0 sysmon
296 0 0 0 0.00% 0.00% 0.00% 0 flashmntr
198 0 0 0 0.00% 0.00% 0.00% 0 inetd
---------- More ----------
Example: show
processes cpu
summary
Dell#show processes cpu summary
CPU utilization 5Sec 1Min 5Min
---------------------------------------
CP 43% 42% 40%
RP 0% 0% 0%
show processes ipc
Display the IPC messaging used internally between Dell Networking OS processes.
Z9500
Syntax
show processes ipc [recv-stats | send-stats] [cp | rp | linecard {slot-id |
all}]
Parameters
recv-stats Enter the keyword recv-stats to display information on IPC receiver-side
messages.
send-stats Enter the keyword send-stats to display information on IPC sender-side
messages.
cp Enter the keyword cp to view IPC message statistics on the Control Processor
CPU.
rp Enter the keyword rp to view IPC message statistics on the Route Processor CPU.
linecard slot-id Enter the slot ID of the line card for which you want to view IPC message
statistics. The range of Z9500 slot IDs is from 0 to 2. Enter linecard all to
view IPC statistics for all line cards.
Defaults Display IPC message statistics on all Z9500 CPUs: Control Processor, Route Processor, and line cards.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Control and Monitoring 117