Reference Guide

ManualsBrandsDell ManualsComputer equipmentNetworking Z9500

1141

Command

History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.2(1.0) Introduced on the Z9500.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

6.1.1.1 Introduced on the E-Series.

Example

Dell#show qos wred-profile

Wred-profile-name min-threshold max-threshold

wred_drop 0 0

wred_ge_y 1024 2048

wred_ge_g 2048 4096

wred_teng_y 4096 8192

wred_teng_g 8192 16384

WRED1 2000 7000

test cam-usage

Verify CAM usage for an input policy-map configuration.

Z9500

Syntax

test cam-usage service-policy input policy-map linecard {slot-id port-set

port-pipe| all}

Parameters

policy-map

Enter the policy map name.

linecard

slot-id

port-set

port-

pipe

(OPTIONAL) Enter the slot number of a line card and a port-pipe number to verify

CAM usage on a specified set of ports. Valid Z9500 slot IDs are 0 to 2. The range

of valid port-pipe numbers is: 0 to 2 on line card 0; 0 to 3 on line cards 1 and 2.

linecard all (OPTIONAL) Enter the keywords linecard all to verify CAM usage on all line

cards.

Defaults none

Command Modes EXEC