Reference Guide

match ip dscp — configures the match criteria based on the DSCP value.
match mac access-group — configures a match criterion for a class map based on the contents of the
designated MAC ACL.
match mac dot1p — configures a match criterion for a class map based on a dot1p value.
match mac vlan — configures a match criterion for a class map based on VLAN ID.
service-queue — assigns a class map and QoS policy to different queues.
show qos class-map — views the current class map information.
clear qos statistics
Clears Matched Packets through class maps applied to inbound ports
Z9500
Syntax
clear qos statistics interface-name
Parameters
interface-name Enter one of the following keywords:
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/port information.
Defaults none
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.18.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.1 Introduced on the E-Series.
Related
Commands
show qos statistics — displays the QoS statistics.
Quality of Service (QoS) 1121