Reference Guide

Example
Dell(conf)# monitor session 60
Dell(conf-mon-sess-60)
Related
Command
show monitor session — displays the monitor session.
show running-config monitor session — displays the running configuration of a monitor session.
show config
Display the current monitor session configuration.
Z9500
Syntax
show config
Defaults none
Command Modes MONITOR SESSION (conf-mon-sess-session-ID)
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.7.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series ExaScale.
7.7.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
7.4.1.0 Introduced on the E-Series.
Example
Dell(conf-mon-sess-2)#show config
!
monitor session 2 type rpm
source fortyGigE 0/60 destination remote-vlan 300 direction rx
source Port-channel 10 destination remote-vlan 300 direction rx
no disable
Dell#
show monitor session
Display information about monitoring sessions.
Z9500
Syntax
show monitor session {session-ID}
To display monitoring information for all sessions, use the show monitor session command.
1084 Port Monitoring