Reference Guide

Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage
Information
CAUTION: Use this command only when you are working directly with a technical support
representative to troubleshoot a problem. Do not use this command unless a technical
support representative instructs you to do so.
show cpu-traffic-stats
View CPU traffic statistics.
Z9500
Syntax
show cpu-traffic-stats [cp | rp | linecard {slot-id]
Parameters
cp Enter the keyword cp to display traffic statistics on the Control Processor CPU.
rp Enter the keyword rp to display traffic statistics on the Route Processor CPU.
linecard slot-id Enter the slot ID of the line card for which you want to display traffic statistics.
The range of Z9500 slot IDs is from 0 to 2. Enter linecard all to display traffic
statistics for all line cards.
Defaults Display CPU traffic statistics for all Z9500 CPUs (Control Processor, Route Processor, and line cards).
Command Modes EXEC
Example
Dell#show cpu-interface-stats
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series
6.2.1.1 Introduced on the E-Series.
Usage
Information
Traffic statistics are sorted on a per-interface basis; the interface receiving the most traffic is displayed
first. All CPU and port information is displayed unless a specific port or CPU is specified. Traffic
information is displayed for router ports only; not for management interfaces. The traffic statistics are
Control and Monitoring 107