Reference Guide

Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.2.1.0 Introduced.
Usage
Information
Reload the system to reset the command-tree counters.
Example
Dell#show command-tree count
!
Enable privilege mode:
enable command usage:3
<0-15> option usage: 0
exit command usage:1
show command-tree command usage:9
count option usage: 3
show version command usage:1
!
Global configuration mode:
aaa authentication enable command usage:1
WORD option usage: 1
default option usage: 0
enable option usage: 0
line option usage: 0
none option usage: 0
radius option usage: 1
tacacs+ option usage: 0
show console lp
View the buffered boot-up log of a line card, Route Processor or Control Processor CPU, including background resets, calls, and
initialization, on the console.
Z9500
Syntax
show console {lp slot-id | rp | cp}
Parameters
lp slot-id Enter a line-card slot number to view the boot-up log of a line-card (LP) processor.
The range of Z9500 slot IDs is from 0 to 2.
rp Enter the rp keyword to view the boot-up log for the Route Processor CPU.
cp Enter the cp keyword to view the boot-up log for the Control Processor CPU.
Defaults none
Command Modes
● EXEC
● EXEC Privilege
106 Control and Monitoring