Reference Guide

Defaults None
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.5(0.1) Introduced on the Z9500.
Usage
Information
In the show license command syntax, host-ip is either an IPv4 dotted decimal address or an IPv6
[x:x:x:x::x] format address.
The following examples show sample output.
Example
If no license is installed, information about the factory-installed 36 40G-port or 132 40G-port
configuration is displayed.
Dell# show license
LICENSE INFORMATION
Vendor : Dell
Product : Dell Force10 Z950
System Service Tag: RtHvKsJ
License Service Tag:
Current State : HW-Port-License 36 Ports (Fo 0/0-Fo 0/140)
Next Boot : HW-Port-License 36 Ports (Fo 0/0-Fo 0/140)
If an 84 40G-port license is installed, the following information is displayed.
Dell# show license
LICENSE INFORMATION
Vendor : Dell
Product : Dell Force10 Z9500
System Service Tag: RtHvKsJ
License Service Tag: RTHVKSJ
Current State : HW-Port-License 84 Ports (Fo 0/0-Fo 1/188)
Next Boot : HW-Port-License 84 Ports (Fo 0/0-Fo 1/188)
To verify the license stored on a remote server using TFTP:
Dell# show license tftp://10.11.8.12/132.lic
!
3594 bytes successfully copied
LICENSE INFORMATION
Vendor : Dell
Product : Dell Force10 Z9500
System Service Tag: RTHVKSJ
License Service Tag: RTHVKSJ
License Type : HW-Port-License 132 Ports (Fo 0/0-Fo 2/188)
Status : Valid license file
1032
Pay As You Grow