Command Line Reference Guide

show ipv6 fib linecard
View all FIB entries.
Z9500
Syntax
show ipv6 fib linecard slot-id [summary | ipv6-address]
Parameters
linecard slot-id Enter the slot ID of the line card. The range of Z9500 slot IDs
is from 0 to 2.
summary (OPTIONAL) Enter the keyword summary to view a summary
of entries in IPv6 cam.
ipv6-address Enter the IPv6 address in the x:x:x:x::x/n format to display
networks that have more specific prefixes. The range is
from /0 to /128.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.7.0 Introduced on the S4810.
8.4.2.1 Introduced on the S-Series.
Usage
Information
Host tables are not stored in CAM tables on S-Series platforms. Entries for
camIndex displays as zero (0) on the show ipv6 fib linecard output for
neighbor entries, such as address resolution protocol (ARP) entries.
Example
Dell# show ipv6 fib linecard 0 summary
Total Number of Routes in the FIB database is 0
Total Number of Routes in the CAM is 1
Total Number of Routes which can be entered in CAM is 155647
IPC Messages Received from RTM 158
[Add route requests 0; Delete Route requests 0]
[Clear Route requests 0]
IPC Messages Received from NDPM 0
Section Current Use
910
IPv6 Basics