Command Line Reference Guide

Number of CAM entries used by NBR entries = 0
Number of CAM entries used by Prefix entries = 1
Section Current Use Initial Size
--------------------------------------
128 0 147519
127 0 63
126 0 63
125 0 63
124 0 63
123 0 63
122 0 63
121 0 63
120 0 63
119 0 63
118 0 63
117 0 63
116 0 63
115 0 63
--More--
show ipv6 control-plane icmp
Displays the status of the icmp control-plane setting for the error eate limit setting.
Z9500
Syntax
show ipv6 control-plane icmp
Default 100
Command
Modes
EXEC
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
Related
Commands
ipv6 flowlabel-zero — Configure IPv6 address auto-configuration for the
management interface.
IPv6 Basics
909