Command Line Reference Guide

linecard slot-id (OPTIONAL) Enter the interface port-type slot/port
parameters to display the ARP entries learned on a Z9500
port. The range of slot IDs is from 0 to 2.
ip ip-address
mask
(OPTIONAL) Enter the keyword ip with an IP address in the
dotted decimal format to display the ARP entries learned
with this IP address. Enter the optional IP address mask in the
slash prefix format (/ x).
macaddress
mac-address
mask
(OPTIONAL) Enter the keyword macaddress with a MAC
address in nn:nn:nn:nn:nn:nn format to display the ARP
entries learned with this MAC address. Enter the optional
MAC address mask in nn:nn:nn:nn:nn format also.
static (OPTIONAL) Enter the keyword static to display manually-
entered ARP entries.
dynamic (OPTIONAL) Enter the keyword dynamic to display
dynamically-learned ARP entries.
summary (OPTIONAL) Enter the keyword summary to view a summary
of ARP entries.
Default Display only the ARP entries learned on the Control Processor.
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Added support for 4094 VLANs on the E-Series ExaScale
(the prior limit was 2094).
8.1.1.0 Introduced on the E-Series ExaScale.
7.9.1.0 Introduced VRF on the E-Series.
7.8.1.0 Augmented to display local ARP entries learned from private
VLANs (PVLANs).
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
IPv4 Routing
837