Command Line Reference Guide

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!...................................................

...............................................................

.............!

93924044 bytes successfully copied

System image upgrade completed successfully.

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!

Image upgraded to all

verify

Validate the software image on the flash drive after the image has been transferred to the system, but

before the image has been installed.

Syntax verify { md5 | sha256 }[ flash:// ] img-file [hash-value]

Parameters

md5 Enter the md5 keyword to use the MD5 message-digest

algorithm.

sha256

Enter the sha256 keyword to use the SHA256 Secure Hash

Algorithm

flash:// (Optional). Enter the flash:// keyword. The default is to

use the flash drive. You can just enter the image file name.

img-file Enter the name the Dell Networking software image file to

validate.

hash-value (Optional). Enter the relevant hash published on i-Support.

Default flash drive

Command

Modes

EXEC mode

Command

History

Version Description

9.5(0.1) Introduced on the Z9500.

9.5(0.0) Introduced on the Z9000, S6000, S4820T, S4810, and

MXL.

Usage

Information

You can enter this command in the following ways:

• verify md5 flash://img-file

File Management