Command Line Reference Guide

Rate info (interval 15 seconds):
Input 00.00 Mbits/sec, 0 packets/sec, 0.00% of
line-rate
Output 37096.40 Mbits/sec, 57963128 packets/sec, 94.88%
of line-rate
Related
Commands
clear hardware hg-stats — clears traffic statistics from internal ports in a HiGig link
bundle.
show hg-link-bundle-distribution
Display the operational status and link utilization in a HiGig link bundle.
Z9500
Syntax
show hg-link-bundle-distribution {sfm npu-id hg-port—channel
hg-port—channel-id | slot slot npuUnit npu-id hg-port—channel
0} enable
Parameters
sfm npu-id hg-
port-channel
hg-port-
channel-id
Specify a HiGig port channel on a Z9500 SFM (spine) NPU by
entering the keyword sfm and SFM NPU ID, then hg-port-
channel
and a HiGig port channel ID. SFM NPU IDs are 0 to
5; SFM HiGig port-channel IDs are 0 to 10.
slot slot-id
npuUnit npu-id
hg-port-
channel 0
Specify a HiGig port channel on a Z9500 line-card (leaf) NPU
by entering the keyword slot and slot number, then
npuUnit and NPU ID, then hg-port-channel 0. Line-card
slot numbers are 0 to 2; line-card NPU IDs are 0 to 3. The
HiGig port-channel ID is always 0 because there is only one
HiGig link bundle used on a line-card NPU to connect to
SFM NPUs.
Command
Modes
EXEC, EXEC Privilege
Command
History
Version Description
9.2.(1.0) Introduced on the Z9500 switch.
9.3.0.0 Introduced on the Z9000 switch.
Usage
Information
The following table illustrates the fields displayed in the output of this command:
Field Description
Link-bundle trigger threshold Percentage value of link-bundle
bandwidth that serves as the threshold
for marking a link bundle as being
overutilized, triggering link-bundle
monitoring, and generating an SNMP
alarm.
Slot Slot number of a Z9500 line card.
Interfaces
783