Command Line Reference Guide

Fo 2/68 Down 40000 Mbit Auto --
Fo 2/72 Down 40000 Mbit Auto --
Fo 2/76 Down 40000 Mbit Auto --
Fo 2/80 Down 40000 Mbit Auto --
Fo 2/84 Down 40000 Mbit Auto --
Fo 2/88 Down 40000 Mbit Auto --
Fo 2/92 Down 40000 Mbit Auto --
Fo 2/96 Down 40000 Mbit Auto --
Fo 2/100 Down 40000 Mbit Auto --
Fo 2/104 Down 40000 Mbit Auto --
Fo 2/108 Down 40000 Mbit Auto --
Fo 2/112 Down 40000 Mbit Auto --
Fo 2/116 Down 40000 Mbit Auto --
Fo 2/120 Down 40000 Mbit Auto --
Fo 2/124 Down 40000 Mbit Auto --
Fo 2/128 Down 40000 Mbit Auto --
Fo 2/132 Down 40000 Mbit Auto --
Fo 2/136 Down 40000 Mbit Auto --
Fo 2/140 Down 40000 Mbit Auto --
Fo 2/144 Down 40000 Mbit Auto --
Fo 2/148 Down 40000 Mbit Auto --
Fo 2/152 Down 40000 Mbit Auto --
Fo 2/156 Down 40000 Mbit Auto --
Fo 2/160 Down 40000 Mbit Auto --
Fo 2/164 Down 40000 Mbit Auto --
Fo 2/168 Down 40000 Mbit Auto --
Fo 2/172 Down 40000 Mbit Auto --
Fo 2/176 Down 40000 Mbit Auto --
Fo 2/180 Down 40000 Mbit Auto --
Fo 2/184 Down 40000 Mbit Auto --
Fo 2/188 Down 40000 Mbit Auto --
Related
Commands
show interfaces — displays information on a specific physical interface or virtual
interface.
show interfaces switchport
Display only virtual and physical interfaces in Layer 2 mode. This command displays the Layer 2 mode
interfaces’ IEEE 802.1Q tag status and VLAN membership.
Z9500
Syntax
show interfaces switchport [interface] [linecard slot-id]
Parameters
interface (OPTIONAL) Enter one of the following keywords and slot/
port or number information:
• For a Port Channel interface, enter the keywords port-
channel
then a number. The range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• Enter the keyword backup to view the backup interface
for this interface.
748
Interfaces