Command Line Reference Guide

• For a Port-Channel interface, enter the keyword port-
channel then the slot/port information. The range is
from 0 to 128.
linecard slot-
number
(OPTIONAL) Enter the keyword linecard then the slot
number.
Defaults none
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
7.5.1.0 Introduced on the E-Series.
Example
Dell#show interfaces status
Port Description Status Speed Duplex Vlan
Te 2/0 Down 10000 Mbit Auto 1
Te 2/1 Down 10000 Mbit Auto --
Te 2/2 Down 10000 Mbit Auto --
Te 2/3 Down 10000 Mbit Auto --
Fo 2/4 Down 40000 Mbit Auto --
Fo 2/8 Down 40000 Mbit Auto --
Fo 2/12 Down 40000 Mbit Auto --
Fo 2/16 Down 40000 Mbit Auto --
Fo 2/20 Down 40000 Mbit Auto --
Fo 2/24 Down 40000 Mbit Auto --
Fo 2/28 Down 40000 Mbit Auto --
Fo 2/32 Down 40000 Mbit Auto --
Fo 2/36 Down 40000 Mbit Auto --
Fo 2/40 Down 40000 Mbit Auto --
Fo 2/44 Down 40000 Mbit Auto --
Fo 2/48 Down 40000 Mbit Auto --
Fo 2/52 Down 40000 Mbit Auto --
Fo 2/56 Down 40000 Mbit Auto --
Fo 2/60 Down 40000 Mbit Auto --
Fo 2/64 Down 40000 Mbit Auto --
Interfaces
747