Command Line Reference Guide

Reuse threshold : 200
Suppression threshold : 250
Max suppression time : 300
Time since last suppressed : 0
Time remaining to change state to up : 0
Related
Commands
dampening — configures dampening on an interface.
show interfaces — displays information on a specific physical interface or virtual
interface.
show interfaces configured — displays any interface with a non-default
configuration.
show interfaces phy
Display auto-negotiation and link partner information.
Z9500
Syntax
show interfaces {tengigabitethernet | fortyGigE} slot/port phy
Parameters
{tengigabitethe
rnet |
fortyGigE}
Enter one of the keywords tengigabitethernet or
fortyGigE with slot/port information.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the C-Series and S-Series.
6.5.4.0 Introduced on the E-Series.
Usage
Information
The following describes the show interfaces tengigabitethernet
command following example.
744
Interfaces