Command Line Reference Guide

linecard slot-id Enter the linecard slot-id parameters to specify the
Z9500 ports on a line card. The range of slot IDs is from 0 to
2.
summary (OPTIONAL) Enter the keyword summary to display the
current summary of dampening data, including the number
of interfaces configured and the number of interfaces
suppressed, if any.
detail (OPTIONAL) Enter the keyword detail to display detailed
interface dampening data.
Defaults none
Command
Modes
EXEC
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
7.4.1.0 Introduced
Example
Dell# show interfaces dampening tengigabitethernet 2
Interface Supp Flaps Penalty Half-Life Reuse
Suppress Max-Sup
State
Te 2/0 Up 0 0 5 200
250 300
Dell# show interfaces dampening summary
1 interface is configured with dampening. No interfaces are
currently suppressed.
Dell# show interfaces dampening detail
Interface : TenGigabitEthernet 2/0
Operation state : down
Suppression state : Up
Flap count : 0
Penalty : 0
Half life : 5
Interfaces
743