Command Line Reference Guide

Virtual-IP IPv6 address is not set
MTU 1554 bytes, IP MTU 1500 bytes
LineSpeed 1000 Mbit, Mode full duplex
ARP type: ARPA, ARP Timeout 04:00:00
Last clearing of "show interface" counters 00:06:14
Queueing strategy: fifo
Input 791 packets, 62913 bytes, 775 multicast
Received 0 errors, 0 discarded
Output 21 packets, 3300 bytes, 20 multicast
Output 0 errors, 0 invalid protocol
Time since last interface status change: 00:06:03
Related
Commands
show interfaces configured – displays any interface with a non-default
configuration.
show interfaces phy
show interfaces switchport – displays Layer 2 information about the interfaces.
show inventory (S-Series and Z-Series) – displays the S-Series and Z-Series switch
types, components (including media), Dell Networking OS version including
hardware identification numbers, and configured protocols.
show ip interface – displays Layer 3 information about the interfaces.
show range – displays all interfaces configured using the interface range
command.
show interfaces configured
Display any interface with a non-default configuration.
Z9500
Syntax
show interfaces configured
Command
Modes
• EXEC
• EXEC Privilege
740
Interfaces