Command Line Reference Guide

• If overlapping port ranges are specified, the port range is extended to the
smallest start port and the biggest end port.
Example (Bulk)
Dell(conf)#interface range te 10/0, fo 0/0, te 2/0
% Warning: Non-existing ports (not configured) are ignored by
interface-range
Example
(Multiple Ports)
Dell(conf)#interface range te 2/0 - 23, te 2/1 - 10
Dell(conf-if-range-te-2/0-23#
Example
(Overlapping
Ports)
Dell(conf)#interface range te 2/1 - 11, te 2/1 - 23
Dell(conf-if-range-te-2/1-23#
Usage
Information
Only VLAN and port-channel interfaces created using the interface vlan and
interface port-channel commands can be used in the interface range
command.
Use the show running-config command to display the VLAN and port-channel
interfaces. VLAN or port-channel interfaces that are not displayed in the show
running-config
command cannot be used with the bulk configuration feature of
the interface range command. You cannot create virtual interfaces (VLAN,
Port-channel) using the
interface range command.
NOTE: If a range has VLAN, physical, and port-channel interfaces, only
commands related to physical interfaces can be bulk configured. To configure
commands specific to VLAN or port-channel, only those respective interfaces
should be configured in a particular range.
Example (Single
Range)
This example shows a single range bulk configuration.
Dell(config)# interface range tengigabitethernet 1/1 - 23
Dell(config-if-range)# no shutdown
Dell(config-if-range)#
Example
(Multiple
Range)
This example shows how to use commas to add different interface types to the
range enabling all 10-Gigabit Ethernet interfaces in the range 2/1 to 2/23 and both
10-Gigabit Ethernet interfaces 1/1 and 1/2.
Dell(config-if)# interface range tengigabitethernet 2/1-23,
tengigabitethernet 1/1-2
Dell(config-if-range)# no shutdown
Dell(config-if-range)#
Example
(Multiple
Range)
This example shows how to use commas to add VLAN and port-channel interfaces
to the range.
Dell(config-if)# interface range tengigabitethernet 2/1-23,
tengigabitethernet 1/1–2,
Vlan 2–100, Port 1–25
Dell(config-if-range)# no shutdown
Dell(config-if-range)#
716
Interfaces