Command Line Reference Guide

vrrp [[ipv6] vrid] (OPTIONAL) Enter the keyword vrrp to clear the counters of
all VRRP groups. To clear the counters of VRRP groups on all
IPv6 interfaces, enter ipv6. To clear the counters of a
specified group, enter a VRID number from 1 to 255.
learning-limit (OPTIONAL) Enter the keywords learning-limit to clear
unknown source address (SA) drop counters when MAC
learning limit is configured on the interface.
Defaults Without an interface specified, the command clears all interface counters.
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
8.4.1.0 Added support (E-Series only) for VRRP groups in a VRF
instance.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Added support for 4093 VLANs on the E-Series ExaScale.
Prior to the release, 2094 was supported.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.5.1.0 Updated the definition of the learning-limit option for
clarity.
Usage
Information
After you enter the clear counters command, interface counters may not be
increased in show command output for up to 20 seconds.
Example
Dell#clear counters
Clear counters on all interfaces [confirm]
Related
Commands
mac learning-limit — allows aging of MACs even though a learning-limit is
configured or disallow station move on learned MACs.
show interfaces — displays information on the interfaces.
702
Interfaces