Command Line Reference Guide

Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
Usage
Information
You can enter the ip address dhcp relay information-option and ip
address dhcp relay vendor-class-identfier commands in the same ip
address dhcp command line; for example:
ip address dhcp vendor-class-identifier dell9500 relay
information-option mac
ip address dhcp relay information-option mac vendor-class-
identifier dell9500
Related
Commands
ip address dhcp — configures an interface to receive its IP address from the
configured DHCP server.
ip address dhcp vendor-class-identifier
Include the vendor-class identifier option (option 60) in DHCP packets sent by the client.
Z9500
Syntax
ip address dhcp vendor-class-identifier text
Parameters
vendor-class-
identifier text
Include a user-configurable text string with the hardware-
related information (option 60) in DHCP packets sent by the
client (32 characters maximum).
Default None.
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
618
Dynamic Host Configuration Protocol (DHCP)