Command Line Reference Guide

{Packets}
--More--
show hardware layer3
Display Layer 3 ACL or QoS data for a Z9500 line card and port pipe.
Z9500
Syntax
show hardware layer3 {acl | qos} linecard slot-id port-set
port-pipe
Parameters
acl | qos Enter either the keyword acl or the keyword qos to select
between ACL or QoS data.
linecardslot-id Enter the linecard slot-id parameters to specify a
Z9500 line card. The range of slot IDs is from 0 to 2.
port-set port-
pipe
Enter the keywords port-set port-pipe parameters to
specify a port pipe (set of ports) on a line card. The range of
port-pipe numbers is: 0 to 2 on line card 0; 0 to 3 on line
cards 1 and 2.
Defaults none
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.0 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
Example
Dell#show hardware layer3 eg-acl linecard 0 port-set 0
EID 0x000011b9: gid=0xf,
slice=2, slice_idx=0, part =0 prio=0x11b9,
flags=0x10202, Installed, Enabled
tcam: color_indep=0,
StageEgress
Color
Offset: 5 Width: 2
DATA=0x00000001
MASK=0x00000003
action={act=RpDrop, param0=0(0), param1=0(0),
param2=0(0), param3=0(0)}
Debugging and Diagnostics
601