Command Line Reference Guide

output counters to which the stacking module is
connected.
• cpu i2c statistics : Displays active i2c-address
statistics.
• cpu management statistics: Displays management
port counters.
• cpu sata-interface statistics: Displays sata-
interface error counter statistics.
cp-switch Enter the keyword cp-switch with a command option to
display hardware statistics for control-plane and protocol
control traffic. The command options are:
• counters: Displays the counters for control-plane and
protocol control packets to troubleshoot an error
condition.
• details: Displays more detailed information on control-
plane and protocol control packet statistics.
• drops: Displays the number of internal drops of control-
plane and protocol control packets.
• port-stats: Displays status about why a control-plane
internal port is not brought up to register level.
• register: Displays internal control-plane registers.
• table-dump: Displays the tables from the bShell.
linecard slot-id Enter the linecard slot-id parameters with a command
option to display hardware statistics from the specified line-
card ports. The range of line-card slot IDs is from 0 to 2. The
command options are:
• buffer total-buffer statistics: Displays the
total number of buffers allocated for a specified line card.
• buffer unit unit-num port statistics: Displays
the number of buffers allocated for a specified NPU. The
range of port-pipe unit numbers is 0 to 3.
• buffer unit unit-num total-buffer
statistics: Displays the number of buffers allocated
for a specified NPU. The range of NPU numbers is 0 to 3.
• cpu data-plane statistics: Displays data-plane
statistics, including the HiGig port statistics with input/
output counters to which the stacking module is
connected.
• cpu i2c statistics: Displays active i2c-address
statistics.
• cpu management statistics: Displays management
port counters for a specified line card.
• cpu sata-interface statistics: Displays sata-
interface error counter statistics.
• drops unit unit-num {port {port-num |
range}
: Displays the number of dropped packets on the
ports of a specified line-card NPU. The range of NPU
numbers is 0 to 3.
584
Debugging and Diagnostics