Command Line Reference Guide

linecard slot-id Enter the linecard slot-id parameters with a command
option to clear the hardware statistics for a specified Z9500
line card. The range of slot IDs is from 0 to 2. The command
options are:
• counters: Clears traffic counters on line-card ports.
• cpu data-plane statistics: Clears data-plane
statistics, including the HiGig port statistics with input/
output counters to which the stacking module is
connected.
• cpu i2c statistics : Clears active i2c-address
statistics.
• cpu sata-interface statistics: Clears sata-
interface error counter statistics.
unit unit-num Enter the unit unit-num parameters with a command
option to clear hardware statistics for a specified NPU. The
range of NPU numbers is 0 to 3. The command options are:
• counters: Clears the packets counters.
party-bus Enter the keyword party-bus with a command option to
clear hardware statistics for the party bus that links Z9500
CPUs. The command options are:
• port port-num statistics: Clears statistics on a
specified party-bus internal port.
• port all: Clear statistics on all party-bus internal ports.
rp Enter the keyword rp with a command option to clear
hardware statistics for the Route Processor. The command
options are:
• cpu data-plane statistics: Clears data-plane
statistics, including the HiGig port statistics with input/
output counters.
• cpu i2c statistics: Clears active i2c-address
statistics.
• cpu sata-interface statistics: Clears sata-
interface error counter statistics.
sfm sfm-unit-
num
Enter the keyword sfm with an Switch Fabric Module (SFM)
unit number and a command option to clear hardware
statistics from the specified SFM on the Z9500. The range of
SFM unit numbers is from 0 to 5. The command options are:
• counters: Clears the traffic counters.
Defaults none
Debugging and Diagnostics
579