Command Line Reference Guide

Version Description
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Introduced on the S-Series.
Usage
Information
This command is used to manually reset or reboot the system when diagnostics
complete.
Related
Commands
diag — run diagnostic tests on an offline switch.
offline stack-unit— bring the system offline to run diagnostic tests.
show diag
Display results of offline diagnostic tests on a switch.
Z9500
Syntax
show diag {all | {{cp | rp | linecard} unit-id} [summary |
detail]
Parameters
all Enter the keyword all to display the results of offline
diagnostic tests on all Z9500 CPUs, including the Control
Processor, Route Processor, and line cards.
cp unit-id Enter the cp unit-id parameters to display the results only
of the offline diagnostic tests run on the Control Processor
CPU. The Control Processor CPU ID is 0.
rp unit-id Enter the rp unit-id parameters to display the results only
of the offline diagnostic test srun on the Route Processor
CPU. The Route Processor CPU ID is 0.
linecard unit-id Enter the linecard unit-id parameters to display the
results only of the offline diagnostic test run on a specified
line card. he range of line-card CPU IDs is from 0 to 2. Each
line-card CPU processes packets on the corresponding
Z9500 line card; for example, line-card CPU 1 processes
packets on line card 1.
summary Enter the keyword summary to display a summary of the
offline diagnostic test results.
detail Enter the keyword detail to display detailed information
about the offline diagnostic test results.
Defaults A summary of the results of offline diagnostic tests run on all Z9500 CPUs (Control
Processor, Route Processor, and line cards) is displayed.
568
Debugging and Diagnostics