Command Line Reference Guide

protocol traffic is sent with the applied rate limits (configured or default) in kilobits
per second (kbps). The egress port queues on CPUs are abbreviated as: RP (Route
Processor), CP (Control Processor), and LC (line card).
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.8.0 Introduced on the S4810.
Example
Dell# show protocol-queue-mapping
CommitRate Peak Rate
CommitBurst PeakBurst
Protocol Queue EgPort (kbps)
(kbps) (kb) (kb)
-------- ----- ------ -------- -------
--------- -------
STP Q15 RP 150
150 1000 1000
LLDP Q7 CP 500
500 1000 1000
PVST Q14 RP 200
200 1000 1000
LACP Q15 RP 500
500 1000 1000
ARP Q2/Q10/Q3/Q11 CP/RP 600
600 1000 1000
GVRP Q14 RP 200
200 1000 1000
FRRP Q22 LP 300
300 1000 1000
ECFM Q15 RP 150
150 1000 1000
ISIS Q15 RP 500
500 3000 3000
L2PT Q15 RP 150
150 1000 1000
v6 BGP Q15 RP 2500
2500 2000 2000
v6 OSPF Q15 RP 2500
2500 2000 2000
v6 VRRP Q15 RP 400
400 2000 2000
MLD Q14 RP 150
150 500 500
v6 MULTICAST Q9 RP 100
100 500 500
CATCH ALL
v6 ICMP NA Q3/Q11 CP/RP 600
600 1000 1000
v6 ICMP RA Q3/Q11 CP/RP 600
600 1000 1000
Control Plane Policing (CoPP)
561