Command Line Reference Guide

Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.8.0 Introduced on the S4810.
Example
Dell#show mac protocol-queue-mapping
Protocol Destination Mac EtherType Queue
EgPort Rate
(kbps)
-------- --------------- --------- -----
------ -----
ARP any 0x0806 Q2/Q10/Q3/
Q11 CP/RP 600
FRRP 01:01:e8:00:00:10/11 any
Q22 LP 300
LACP 01:80:c2:00:00:02 0x8809
Q15 RP 500
LLDP any 0x88cc
Q7 CP 500
GVRP 01:80:c2:00:00:21 any
Q14 RP 200
STP 01:80:c2:00:00:00 any
Q15 RP 150
ISIS 01:80:c2:00:00:14/15 any
Q15 RP 500
09:00:2b:00:00:04/05 any
Q15 RP 500
show protocol-queue-mapping
Display the Z9500 protocol-queue mapping for each configured protocol.
Z9500
Syntax
show protocol-queue-mapping [queue-id queue-number]
Parameters
queue-id
queue-number
(Optional) Display the protocol-queue mapping for a
specified control-plane queue. The range of CPU queue
numbers is from 0 to 23.
Defaults Not configured.
Command
Modes
EXEC Privilege
Usage
Information
The show output displays information on CPU traffic flows for all protocols,
including the ingress queue at which the traffic is queued and the CPU to which
560
Control Plane Policing (CoPP)