Command Line Reference Guide

Example
Dell#show ip protocol-queue-mapping
Protocol Src-Port Dst-Port TcpFlag Queue EgPort
Rate (kbps)
-------- -------- -------- ------- ----- ------
-----------
TCP (BGP) any/179 179/any _ Q15
RP 2500
UDP (DHCP) 67/68 68/67 _ Q7
CP 1200
UDP (DHCP-R) 67 67 _ Q7
CP 1200
TCP (FTP) any 21 _ Q4
CP 400
ICMP any any _ Q6
CP 300
IGMP any any _ Q14
RP 300
TCP (MSDP) any/639 639/any _ Q14
RP 100
UDP (NTP) any 123 _ Q4
CP 200
OSPF any any _ Q15
RP 2500
PIM any any _ Q14
RP 300
UDP (RIP) any 520 _ Q15
RP 200
TCP (SSH) any 22 _ Q4
CP 400
TCP (TELNET) any 23 _ Q4
CP 400
VRRP any any _ Q15
RP 400
show ipv6 protocol-queue-mapping
Display the Z9500 CPU queue mapping for IPv6 protocols.
Z9500
Syntax
show ipv6 protocol-queue-mapping
Defaults Not configured.
Command
Modes
EXEC Privilege
Usage
Information
The show output displays information CPU traffic flows for supported IPv6
protocols, including the ingress queue at which the traffic is queued and the CPU
to which protocol traffic is sent with the applied rate limits (configured or default)
in kilobits per second (kbps). The egress port queues on CPUs are abbreviated as:
RP (Route Processor), CP (Control Processor), and LC (line card).
558
Control Plane Policing (CoPP)