Command Line Reference Guide

Command
History
Version Description
9.2(1.0) Introduced on the Z9500.
8.2.1.0 Introduced on the E-Series ExaScale.
7.4.1.0 Introduced
show ipv6 prefix-list
Displays the specified IPv6 prefix list.
Z9500
Syntax
show ipv6 prefix-list detail {prefix-list name} | summary
Parameters
detail Display a detailed description of the selected IPv6 prefix list.
prefix-list name Enter the name of the prefix list.
NOTE: There is a 140-character limit for prefix list
names.
summary Display a summary of RPF routes.
Command
Modes
EXEC
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
9.0.0.0 Introduced on the Z9000.
8.3.10.0 Introduced on the S4810.
Related
Commands
ipv6 prefix-list — configures an IPv6 prefix-list.
show ip bgp ipv6 unicast
View the current BGP routing table.
Z9500
Syntax
show ip bgp ipv6 unicast [network [network-mask] [longer-
prefixes]]
Border Gateway Protocol
527