Command Line Reference Guide

Command
Modes
EXEC Privilege
Command
History
Version Description
9.2(1.0) Introduced on the Z9500.
8.2.1.0 Introduced on the E-Series ExaScale.
7.4.1.0 Introduced
Usage
Information
If you enter clear ip bgp flap-statistics without any parameters, all
statistics are cleared.
Related
Commands
show ip bgp ipv6 unicast flap-statistics – views BGP flap statistics.
clear ip bgp ipv6 unicast
Reset MBGP sessions.
Z9500
Syntax
clear ip bgp ipv6 unicast * ipv6-address prefix-length
[dampening | flap-statistics] peer-group]
Parameters
* Enter the character * to clear all peers.
ipv6-address
prefix-length
Enter the IPv6 address in the x:x:x:x::x format followed by the
prefix length in the /x format. The range is /0 to /128.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
dampening (OPTIONAL) Enter the keyword dampening to clear route
flap dampening information.
flap-statistics (OPTIONAL) Enter the keywords flap-statistics to reset
the flap statistics on all prefixes from that neighbor.
peer-group (OPTIONAL) Enter the keywords peer-group to clear all
members of a peer-group.
Command
Modes
EXEC Privilege
Command
History
Version Description
9.2(1.0) Introduced on the Z9500.
7.4.1.0 Introduced
Border Gateway Protocol
487