Command Line Reference Guide

MBGP Commands
Multiprotocol BGP (MBGP) is an enhanced BGP that enables multicast routing policy throughout the
internet and connecting multicast topologies between BGP and autonomous systems (ASs).
MBGP on the Dell Networking OS is implemented as per IETF RFC 1858.
BGPv4 is supported in the following:
Dell Networking
OS Version
Platform Support
Z9500
7.8.1.0, MBGP for
IPv6
TeraScale and C-Series
7.8.1.0, MBGP for
IPv4 Multicast Only
S-Series
8.2.1.0, MBGP E-Series ExaScale
debug ip bgp dampening
View information on routes being dampened.
Z9500
Syntax
debug ip bgp ipv4 multicast dampening
To disable debugging, use the no debug ip bgp ipv4 multicast dampening
command.
Parameters
dampening Enter the keyword dampening to clear route flap dampening
information.
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
450
Border Gateway Protocol