Command Line Reference Guide

show ip bgp summary
Allows you to view the status of all BGP connections.
Z9500
Syntax
show ip bgp [ipv4 unicast] summary
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage
Information
The following describes the show ip bgp summary command shown in the
following example.
Field Description
BGP router
identifier
Displays the local router ID and the AS number.
BGP table version Displays the BGP table version and the main routing table
version.
network entries Displays the number of network entries, route paths, and
the amount of memory used to process those entries.
paths Displays the number of paths and the amount of memory
used.
denied paths Displays the number of denied paths and the amount of
memory used.
BGP path attribute
entries
Displays the number of BGP path attributes and the amount
of memory used to process them.
BGP AS-PATH
entries
Displays the number of BGP AS_PATH attributes processed
and the amount of memory used to process them.
446
Border Gateway Protocol