Command Line Reference Guide

Line beginning
with:
Description
Number of peers Displays the number of peers currently configured for this
peer group.
Peer-group
members:
Lists the IP addresses of the peers in the peer group. If the
address is outbound optimized, an * is displayed next to the
IP address.
Example
Dell#show ip bgp peer-group
Peer-group RT-PEERS
Description: ***peering-with-RT***
BGP version 4
Minimum time between advertisement runs is 30 seconds
For address family: IPv4 Unicast
BGP neighbor is RT-PEERS
Number of peers in this group 20
Peer-group members (* - outbound optimized):
12.1.1.2*
12.1.1.3*
12.1.1.4*
12.1.1.5*
12.1.1.6*
12.2.1.2*
12.2.1.3*
12.2.1.4*
12.2.1.5*
12.2.1.6*
12.3.1.2*
12.3.1.3*
12.3.1.4*
12.3.1.5*
12.3.1.6*
12.4.1.2*
12.4.1.3*
12.4.1.4*
12.4.1.5*
12.4.1.6*
Related
Commands
neighbor peer-group (assigning peers) — assigns a peer to a peer-group.
neighbor peer-group (creating group) — creates a peer group.
show ip bgp regexp
Display the subset of the BGP routing table matching the regular expressions specified.
Z9500
Syntax
show ip bgp regexp regular-expression [character]
Border Gateway Protocol
443