Command Line Reference Guide

capture bgp-pdu max-buffer-size
Set the size of the BGP packet capture buffer. This buffer size pertains to both IPv4 and IPv6 addresses.
Z9500
Syntax
capture bgp-pdu max-buffer-size 100-102400000
Parameters
100-10240000
0
Enter a size for the capture buffer.
Defaults 40960000 bytes.
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
7.5.1.0 Introduced
Related
Commands
capture bgp-pdu neighbor — enables capture of an IPv4 BGP neighbor packet.
show capture bgp-pdu neighbor — displays BGP packet capture information for an
IPv6 address on the E-Series.
clear ip bgp
Reset BGP sessions on the E-Series. The soft parameter (BGP Soft Reconfiguration) clears the policies
without resetting the TCP connection.
Z9500
Syntax
clear ip bgp * | as-number | ip-address [flap-statistics | soft
[in | out]]
Parameters
* Enter an asterisk ( * ) to reset all BGP sessions.
362
Border Gateway Protocol