Command Line Reference Guide

Defaults none
Command
Modes
INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.8.1.0 Increased the name string to accept up to 140 characters.
Prior to 7.8.1.0, names are up to 16 characters long.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
Usage
Information
You can assign one ACL (standard or extended) to an interface.
If you apply a MAC ACL on a VLAN:
• None of the VLAN members can have another ACL applied which has an entry
for the VLAN.
• The VLAN cannot belong to an ACL VLAN group.
If you apply a MAC ACL on a physical or port-channel interface, a VLAN to which
the port is associated cannot have another ACL applied.
If you apply a MAC ACL on an ACL VLAN group, none of the VLANs in the group
can have another ACL applied.
Related
Commands
mac access-list standard — configures a standard MAC ACL.
mac access-list extended — configures an extended MAC ACL.
Access Control Lists (ACL)
261