Command Line Reference Guide

Related
Commands
deny — Assigns a IP ACL filter to deny IP packets.
ip access-list standard — creates a standard ACL.
resequence access-list
Re-assign sequence numbers to entries in an existing ACL.
Z9500
Syntax resequence access-list {ipv4 | ipv6 | mac} {access-list-name StartingSeqNum Step-
to-Increment}
Parameters
ipv4 | ipv6 |
mac
Enter the keyword ipv4, ipv6 or mac to identify the access-
list type to resequence.
access-list-
name
Enter the name of a configured ACL.
StartingSeqNu
m
Enter the starting sequence number to resequence. For IPv4
and IPv6 ACLs, the range is 0 to 4294967290; for MAC ACLs,
the range is 0 to 65535.
Step-to-
Increment
Enter the step to increment the sequence number. For IPv4
and IPv6 ACLs, the range is 0 to 4294967290; for MAC ACLs,
the range is 0 to 65535.
Defaults The sequence number of ACL entries increases in multiples of 5; for example, seq
5, seq 10, seq 15 ...
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the E-Series ExaScale (IPv6).
8.1.1.0 Introduced on the E-Series ExaScale (IPv4).
214
Access Control Lists (ACL)