Command Line Reference Guide

write
Copy the current configuration to either the startup-configuration file or the terminal.
Z9500
Syntax
write {memory | terminal}
Parameters
memory Enter the keyword memory to copy the current running
configuration to the startup configuration file. This
command is similar to the copy running-config
startup-config command.
terminal Enter the keyword terminal to copy the current running
configuration to the terminal. This command is similar to the
show running-config command.
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage
Information
The write memory command saves the running-configuration to the file labeled
startup-configuration. When using a LOCAL CONFIG FILE other than the startup-
config not named “startup-configuration,” the running-config is not saved to that
file.
Control and Monitoring
179