Command Line Reference Guide

util-threshold cpu
Configure the high or low CPU utilization thresholds for SNMP traps.
Z9500
Syntax
util—threshold cpu {5sec | 1min | 5min} {cp |rp | linecard
slot–id | all} {high {0-100} | low {0-100}}
Parameters
cpu-utilization-
time
Enter one of the following values to configure the threshold
level for the time in which a Z9500 CPU can be used:
• 5sec
• 1min
• 5min
cp Enter the keyword cp to configure the CPU utilization time
for the Control Processor CPU.
rp Enter the keyword rp to configure the CPU utilization time
for the Route Processor CPU.
linecard slot-id Enter the slot ID of the line card for which you want to
configure the CPU utilization time. The range of Z9500 slot
IDs is from 0 to 2.
all Enter the keyword all to configure the CPU utilization time
on all Z9500 CPUs: Control Processor, Route Processor, and
line cards.
{{high | low}
cpu-utilization-
threshold-
percentage}
Enter a percentage value to configure the high or low
threshold level for the time in which a Z9500 CPU can be
used. The percentage of CPU use ranges from 0 to 100.
NOTE: A threshold level of 0 will disable Syslog and
SNMP traps.
Defaults
• High CPU utilization threshold: 1min = 85%, 5min = 80%
• Low CPU utilization threshold: 1min = 75%, 5min = 70%
Command
Modes
CONFIGURATION
Command
History
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
Control and Monitoring
175