Command Line Reference Guide

Version Description
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command
upload trace-log
Upload a trace log file from a Z9500 CPU.
Z9500
Syntax
upload trace-log {rp | linecard slot-id} {cmd-history | hw-
trace | sw-trace}
Parameters
rp Enter the keyword rp to upload a trace log from the Route
Processor CPU.
linecard slot-id Enter the linecard slot-id parameters to specify the
line-card CPU whose trace log you want to upload.
cmd-history Enter the keyword cmd-history to upload the command
history from the specified CPU.
hw-trace Enter the keyword hw-trace to upload the hardware trace
log from the specified CPU.
sw-trace Enter the keyword sw-trace to upload the software trace
log from the specified CPU.
Defaults None.
Command
Modes
CONFIGURATION
Command
History
Version Description
9.2(1.0) Introduced on the Z9500.
8.1.1.0 Introduced on the E-Series ExaScale.
7.5.1.0 Introduced on the C-Series.
Usage
Information
Trace log information is uploaded to flash:/TRACE_LOG_DIR.
174
Control and Monitoring