Command Line Reference Guide

vlt-peer-mac transmit
Configures a peer to sent its VLT peer's MAC address along with its LLDP TLV.
Z9500
Syntax
[no] vlt-peer-mac transmit
Command
Modes
VLT DOMAIN PROXY GW LLDP
Command
History
Version Description
9.5(0.1) Introduced on the Z9500.
9.4(0.0) Introduced on the S4810, S4820T, S6000, Z9000, and MXL
Switch.
Usage
Information
In a square VLT topology with only one link connecting remote peers, if you
configure this command, any node has to send its VLT peer’s MAC address along
with its own MAC address to the remote VLT domain. By default, a node will send
only its own MAC address to the remote VLT domain. This parameter is applicable
for an LLDP proxy gateway configuration.
Example
Dell(conf-vlt-domain-proxy-gw-lldp)# vlt-peer-mac transmit
show vlt-proxy-gateway
Display the VLT proxy gateway configuration.
Z9500
Syntax
show vlt-proxy-gateway info {lldp | static}
Parameters
lldp Display details about the LLDP VLT proxy gateway
configuration
static Display details about the static VLT proxy gateway
configuration
Command
Modes
EXEC
EXEC Privilege
EXEC Privilege
Command
History
Version Description
9.5(0.1) Introduced on the Z9500.
VLT Proxy Gateway
1703