Command Line Reference Guide

Command
History
Version Description
9.5(0.1) Introduced on the Z9500.
9.4(0.0) Introduced on the S4810, S4820T, S6000, Z9000, and MXL
Switch.
Usage
Information
You can configure the port channel interface that must be associated with the
LLDP proxy gateway and exclude a VLAN or a range of VLANs from proxy routing.
This parameter is for an LLDP proxy gateway configuration.
Example
Dell(conf)#vlt-domain 1
Dell(conf-vlt-domain)#proxy-gateway lldp
Dell(conf-vlt-domain-proxy-gw-lldp)#peer-domain-link port-
channel 20 exclude-vlan 3
proxy-gateway peer-timeout
Configure the proxy-gateway VLT peer timeout value.
Z9500
Syntax
[no] peer-timeout value
Parameters
value Enter the timeout value in seconds. The range is from 1 to
65535. The default is infinity.
Command
Modes
VLT DOMAIN PROXY GW LLDP
Command
History
Version Description
9.5(0.1) Introduced on the Z9500.
9.4(0.0) Introduced on the S4810, S4820T, S6000, Z9000, and MXL
Switch.
Usage
Information
In a square VLT topology with only one link connecting remote peers, a node must
stop sending its VLT peer MAC address ("vlt-peer-mac transmit" enabled) when the
VLT peer is down. If you configure this time out interval, it will keep sending its
peer's MAC address until the timer expires.
Example
Dell(conf-vlt-domain-proxy-gw-lldp)# peer-timeout 5
1702
VLT Proxy Gateway