Command Line Reference Guide

Command
History
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.4.1.0 Introduced on the C-Series, E-Series, S25 and S50.
Usage
Information
Use the show util-threshold cpu command to display the CPU utilization
thresholds used to send SNMP traps. When Z9500 CPUs exceed the configured
time to process packets or data, a threshold notification is sent as an SNMP trap. To
reconfigure the currently configured values, use the
util-threshold cpu
command.
Example
Dell# show util-threshold cpu
Processor 5Sec 1Min 5Min
High Low High Low High Low
=========================================================
CP 0 0 85 75 80 70
RP 0 0 85 75 80 70
LP 0 0 0 85 75 80 70
LP 1 0 0 85 75 80 70
LP 2 0 0 85 75 80 70
Related
Commands
• util-threshold cpu – Configure CPU utilization thresholds.
• util-threshold mem – Configure memory utilization thresholds.
show util-threshold memory
Display the memory utilization thresholds of Z9500 CPUs.
Z9500
Syntax
show util—threshold memory
Defaults None
Command
Modes
EXEC Privilege
Command
History
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.4.1.0 Introduced on the C-Series, E-Series, S25 and S50.
Control and Monitoring
167