Command Line Reference Guide

The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.11.1 Introduced on the Z9000.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
Usage
Information
The number parameter in the ntp trusted-key command must be the same
number as the number parameter in the ntp authentication-key command. If
you change the
ntp authentication-key command, you must also change the
ntp trusted-key command.
Related
Commands
ntp authentication-key — sets an authentication key for NTP.
ntp authenticate — enables the NTP authentication parameters you set.
ntp update-calendar
Configure the system to update the calendar (the hardware clock) with the NTP-derived time.
Z9500
Syntax
ntp update-calendar [minutes]
To return to default setting, use the no ntp update-calendar command.
Parameters
minutes (OPTIONAL) Enter the number of minutes between updates
from NTP to the hardware clock. The range is from 1 to
1440. The default is 60 minutes.
Defaults Not enabled.
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
1640
System Time and Date